Need help?Do you have a question about the ATC SCM12 PRO and is the answer not in the manual?
General| Matched Response | ±0.5dB |
|---|---|
| Type | 2-way studio monitor |
| Drivers | 1 x 1" tweeter |
| Input Connectors | XLR, TRS |
| Dispersion | ±80° horizontal, ±10° vertical |
High performance 2-way passive nearfield monitor with bi-wire connection capability.
Read instructions, retain them, follow all instructions, avoid water, heat, and unauthorized servicing.
Handle the heavy SCM12 Pro with care, unpack on a large surface, and remove from packaging gently.
Optimize performance by considering room acoustics and speaker placement to minimize low frequency problems.
Position for equilateral triangle in stereo and equidistant in surround for optimal sound imaging.
Explains bi-wire capability and terminal connection for drivers using bare wire, plugs, or spades.
Recommends high power output amplifiers (>150W) due to low sensitivity and potential for distortion with underpowered units.
Advise listening at low levels initially to avoid distortion and perceive sound accurately due to low system distortion.
High-quality finishes are durable; clean with a dry duster or a slightly moistened cloth with mild cleaner.
Lists driver details, frequency response, dispersion, SPL, crossover, recommended amplifier, impedance, connectors, dimensions, and weight.
Two-year warranty against defects, extendable to six years with warranty card registration. Contact details provided.
To Next Page
