Need help?Do you have a question about the Ateis UAP G3 and is the answer not in the manual?
General| Brand | Ateis |
|---|---|
| Model | UAP G3 |
| Category | Computer Hardware |
| Language | English |
General safety guidelines and warnings for proper and safe use of the apparatus.
Specifies the minimum system requirements for installing and running the UAP G3 Designer software.
Instructions on how to mount the UAP G3/G3H audio processor in a standard 19-inch rack.
Guidance on connecting the 24VDC power adapter to the UAP G3/G3H audio processor.
Overview of the UAP G3/G3H unit, including front and rear panel descriptions.
Steps for installing and starting the UAP G3 Designer software.
Overview of the main toolbar functions in the UAP G3 Designer software.
How to control the UAP G3/G3H using external devices via Ethernet or communication interface.
How to control UAP G3/G3H devices using various event types like paging or message playback.
Managing connected devices, viewing status, and performing operations like reboot or update.
Basic DSP control functions including analog and logic operations.
DSP components for dynamic audio processing like AGC, Compressor, and Gate.
DSP components for filtering audio signals, including All Pass, Crossover, and Notch filters.
Control and monitoring of microphone and line audio input signals (MI, MI-2, LI).
Adjusting the volume level of input and output signals.
Component for playing audio message files and managing playback events.
Automatically mixes multiple input signals based on priority and volume.
Mixes signals and adjusts volume levels for inputs and outputs.
Generates sound masking to improve workplace acoustics and privacy.
Generates single frequency tones or sweep sequences.
Generates white noise for equalization and system testing.
Activates and routes audio inputs to outputs based on priority and gate status.
Routes input sources to zones using priority arbitration for paging.
Displays and monitors incoming audio signal amplitude using RMS or Peak approaches.
Assigns channel inputs to outputs or vice versa.
Detects input signals and shows active status, setting logic output to High.
Tags audio sources with types, priorities, and EVAC status for routing.
Adjusts the level of USB audio input/output.
Handles audio streams over IP networks for playback or remote transmission.
Enables voice over internet protocol for transmitting/receiving audio and phone calls.
Suppresses local echo or feedback using pre-processing and post-processing.
Guidelines for cleaning the unit and removing dust to ensure proper operation.
Procedures for requesting technical support for unit malfunctions.
Specifications related to power, logic inputs, and general audio performance.
Detailed audio specs for I/O and network connectivity parameters.
Worldwide branch contact details for ATEÏS.
To Next Page