Quick connector (on front face) (option)
Use this function to check the
calibration.
As this connector is part of the measurement circuit, all its connections must be air tight.
Test and reference outputs
1 Test connector
2 Reference connector
3 Not used
4 Exhaust output
5 Pressurization output
Metallic fitting available for test (1) and
reference (2) connectors:
— 2.7/4 mm
— 3/5 mm
— 4/6 mm
— 6/8 mm.
Differential sealed part connectors (option) (V1 and V2)
External volume (closed tube) connection.
Metallic fitting available for V1 and V2
connectors:
— 2.7/4 mm
To Next Page
Loading...
