Other inputs / outputs
The outputs enables parts to be connected (test and reference).
1
0.6 MPa valves air supply input (1 MPa
range)
2
Optional fitting according to special
configuration
3
Optional fitting according to special
configuration
Pneumatic output 0.6 MPa (87 PSI) (option)
A and B: automatic connectors option.
These connectors are used to drive
pneumatic caps on the part under test.
Air supply input for options
Instant fitting: 6 mm diameter
— Vacuum input for vacuum range.
Calibration check by volume variation connector (option) (V)
External volume (closed tube) connection.
To Next Page
Loading...
