ATEQ F670 - Page 29

QSG_F670_363.00_EN_01_2021-02-09
29/42
Direct mode – Test check by pressure drop option
Pressure from 0 to 500 kPa (72.5 PSI).
Connection
Option / description
Air supply to 1
Connection of the air supply to the filter input (0.6 MPa (87 PSI))
Vacuum to 2
Connection to the vacuum (option)
3 to 4
Connection of the reference output to the reference part
5 to 6
Connection of the test output to the part under test
7 to 8
Connection of the V output an additional volume