ATEQ F670 - Page 32

QSG_F670_363.00_EN_01_2021-02-09
32/42
The Measurement cycle screen
The Measurement cycle screen displays the different values of the current test (or last one).
1 Test pressure measurement
2 Test result or step phase
3 Test reject value
4 Vertical line test result
5 Remaining time of the current phase
or ready status
6 Leak measurement
7 Measurement unit
8 Current program
9 Vertical line test result
A star (*) can be displayed after the measurement unit 7 when the standard conditions
function is validated.
Refer to the Reference Manual.
The MAIN MENU screen
The MAIN MENU screen gives access to different sections for managing the device and the
test parameters.
Access: from the Program screen, press .
Option
Description
SPE CYCLE
Specific procedures necessary to ensure the proper operation of
measurement cycles (for example, adjustment of a pressure regulator).
PARAMETERS
Parameters of the test programs.
CONFIGURATION
General configuration of the device.
SERVICE
Maintenance of the device.
RESULTS
Test results, backup and display options.
USB
USB connection functions (backup, restore).