ATEQ F670 Quick Start

Quick start - F670
MR-36300C-U Quick start manual ATEQ F670 Page 15/25
3. PROGRAMS MANAGEMENT
3.1. LEAK PROGRAM CREATION
From the main menu, select the
"PARAMETERS" menu by using the "Up"
and "Down" keys and then validate with
"OK".
Select the test program number to create
(or modify).
------------ for an empty program.
PARAMETERS
► Copy-Paste
Pr:01 -----------------
Pr:02 -----------------
Pr:03 -----------------
Pr:04 -----------------
Pr:05 -----------------
Pr:06 -----------------
Pr:07 -----------------
Then Select the test type: LEAK.
PARAM / TYPE
► LEAK TEST
BLOCKAGE
DESENSITIZED TEST
OPERATOR
The parameters menu is displayed, access
to each parameter by using the "Up" or
"Down" keys and validate with "OK" to edit
the parameter.
PARAM / Pr001
► TYPE : LEAK TEST
COUPL A : 0.0 s
FILL TIME : 0.0 s
STAB TIME : 0.0 s
TEST TIME : Inf. s
DUMP TIME : 0.0 s
Press. UNIT: bar
Max FILL : 0.000
Then by using the "Up" or "Down" keys
and adjust the parameter to the desired
value and validate with "OK".
PARAM / Pr001
TYPE : LEAK TEST
COUPL A : 0.0 s
FILL TIME : 0.0 s
STAB TIME : 0.0 s
TEST TIME : 2.0 s ◄
DUMP TIME : 0.0 s
Press. UNIT: bar
Max FILL : 0.000
Do the same process for all the others parameters.

ATEQ F670 Specifications

General

Brand	ATEQ
Model	F670
Category	Test Equipment
Language	English