ATEQ VT36 Reference Guide

VT36 GB VHA1-00-02
The tool will vibrate/beep after receiving
the sensor information. The tool will
display the sensor ID, pressure, and
sensor state of the valve that is triggered.
If the tool does not receive the correct
information, the fail LED will illuminate
and you can restart the trigger sequence
by pressing the key again.
Low Bat
Pass
Fail
Tx
Follow the same procedure for the rest of
the three or four wheels by pressing the
key and then key.
(Refer to vehicle owner’s manual or other
reference guides for TPM reset
procedure.)

ATEQ VT36 Specifications

General

Brand	ATEQ
Model	VT36
Category	Media Converter
Language	English