REGENERATIVE
BREAKING
Recover the scooter’s kinetic energy and convert it
to be stored in the battery. To activate Regenerative
Braking, the battery should be below 80% and
speed, above 20 km/h.
HOW TO ACTIVATE IT?
Press the brake levers or rev the throttle in the
opposite direction (anti-clockwise). Algorithms
dictate the amount of regen, depending on the
battery state and speed of the scooter.
REGEN DISABLED
Regen is disabled when the charge status is high
(higher the remaining range, lesser the regen) or
when the battery temperature is high.
CAUTION
The scooter can’t be brought to a halt using
regenerative braking as it gets activated only when
you’re going over 20 km/h.
27
On the road
To Next Page
Loading...
