Once the handlebar is unlocked, turn the key
anti-clockwise to open the underseat storage.
Take your helmet out, wear it, simply drop the
seat to lock it. Check the seat lock once, just to
be doubly sure.
Now you are all set for the ride!
Once the key is turned ON, it will activate the
touchscreen display, showing the current time,
motor status and available range. You can choose
the ride mode here -Eco / Ride / Sport / Warp
1 SWITCH ON THE DISPLAY
If the kill switch is engaged,
the motor will not switch on.
2 DISENGAGE THE KILL SWITCH
Press the brake lever (either one) and the motor
start switch on the right hand side of handlebar.
‘Motor ON’ notification will flash on the dashboard.
Scooter makes no significant sound when the motor is ON
3 ACTIVATE THE MOTOR
4 TOGGLE TO CHANGE RIDING MODE
WARNING
28
To Next Page
Loading...
