Regenerative braking recovers the scooter’s kinetic
energy and converts it to be stored in the battery.
To activate charge levels should be below 80% and
speed needs to be over 20 kmph
REGENERATIVE BRAKING
Press the brake levers or turn the accelerator
grip away from yourself. Algorithms dictate the
amount of regen, depending on the state of the
battery and speed of the scooter.
2 HOW TO ACTIVATE IT?
Regen is disabled when the charge status is
higher (higher the range, lesser the regen) or
when the battery temperature is high.
Scooter can’t be brought to a halt using regenerative
braking as it gets activated only above 20 kmph.
REGEN DISABLED
CAUTION
The scooter may be forced to Eco Mode when the
battery charge is too low.
CAUTION
WARNING
Incase of errors or glitches, the performance of
the scooter might be restricted to ensure rider’s
safety. If this happens, please contact customer
support immediately.
WARNING
32
To Next Page
Loading...
