68 Set the Anti-Aliasing preference manually
2 Click All Settings.
3 Ensure the application override is enabled. To do so, make sure the
Let the Application Decide check box is selected.
Note: The slider control becomes unavailable.
Set the Catalyst™ A.I. setting
1 From the Tree View pane, expand 3D.
2 Click All Settings.
3 Scroll to Catalyst™ A.I.
4 Click the Control slider and move the selector to the left to increase
processing performance, or to the right to increase image quality.
Set the Mipmap detail level
1 From the Tree View pane, expand 3D.
2 Click All Settings.
3 Scroll to Mipmap Detail Level.
4 Click the Control slider and move the selector to the left to increase
processing performance, or to the right to increase image quality.
Set Wait for vertical refresh setting
1 From the Tree View pane, expand 3D.
2 Click All Settings.
3 Scroll to Wait for vertical refresh.
4 Click the Control slider and move the selector to the left to increase
processing performance, or to the right to increase image quality.
Select a SmartShader™ effect
1 From the Tree View pane, expand 3D.
2 Click All Settings.
3 Scroll to SmartShader™ Effects.
4 Select an effect from the drop down-menu.
Note: Effects in the list not supported by Direct 3D® are appended
with “(OpenGL® only)”.
To Next Page
Loading...
