40 Installing the CATALYST™ Software Suite
To install and detect your new hardware
1Click Next to allow Windows® to search for the Standard VGA or
Standard PCI Graphics Adapter.
If prompted for the Windows® CD-ROM, insert it into your CD-ROM
drive.
2 Type the following:
D:\<Operating System name> for example
D:\WinXP.
If
D is not your CD-ROM drive, substitute D with the correct drive
letter.
3Click
OK.
4Click
Finish to close the Wizard and then restart your system.
Installing the CATALYST™ Software Suite
ATI’s CATALYST™ software suite provides you with all you need to get
the most out of your ATI Graphics Accelerator card. The CATALYST™
software suite comprises four, distinct software elements:
•Driver.
• Multimedia Center.
• HydraVision (not included in the Express Install).
• Remote Wonder Software.
To ensure you install supported software, use the ATI Installation CD-
ROM that shipped with your ATI Graphics Accelerator card.
To install the CATALYST™ Software Suite
1 Insert the ATI INSTALLATION CD-ROM into your CD-ROM drive.
If Windows® runs the CD-ROM automatically, proceed to step 6.
2Click
Start.
3 Select
Run.
4 Type the following:
D:\ATISETUP
If D is not your CD-ROM drive, substitute D with the correct drive
letter.
5Click
OK.
6Click
Install under Software Install.
7Click
Next.
8Click
Yes to the license agreement.
To Next Page
Loading...
