ATI Technologies THRASHER LZ170-3A - Page 20

5-
2
ITEM
ROUTINE
Rear brake
● Check operation. If soft or spongy, have a dealer bleed hydraulic system.
● Check brake pads for water, and replace if necessary.
● Check brake fluid level in reservoir, and add specified brake fluid to
specified level if necessary.
● Check hydraulic system for leakage. Correct if necessary.
Throttle lever
● Make sure that operation is smooth. Lubricate cable and lever housing if
necessary.
● Check lever free play, and adjust if necessary.
Control cables
● Make sure that operation is smooth. Lubricate if necessary.
Drive chain
● Check chain slack, and adjust if necessary.
● Check chain condition. Lubricate if necessary.
Wheels and tires
● Check wheel condition, and replace if damaged.
● Check tire condition and tread depth. Replace if necessary.
● Check air pressure. Correct if necessary.
Hand Shift lever
● Make sure that operation is smooth.
● Correct if necessary
Brake levers
● Make sure that operation is smooth. Lubricate lever pivoting points if
necessary.
Chassis fasteners
● Make sure that all nuts, bolts and screw are properly tightened.
Instruments, lights
and switches
● Check operation, and correct if necessary.