Installing Drivers and Software in Windows® 9
CHAPTER 3:
Installing Software
This chapter will guide you through the installation of the drivers and
software associated with your TV WONDER™ ELITE card.
Note: In order to use your TV WONDER™ ELITE, you will need to
install PowerCinema™ - ATI Edition or use Windows® XP Media
Center Edition® 2005.
Installing Drivers and Software in
Windows®
You will need to install the TV WONDER™ ELITE drivers and software
in the following cases:
• After you have installed the card in your system.
• After you have reinstalled or upgraded your operating system.
This procedure applies to Windows® XP.
Software Installation Prerequisites
To install or remove the drivers, you must have administrator rights or be
logged on as a user with administrator rights.
Your operating system must be installed and running before you can install
the TV WONDER™ ELITE drivers. We also recommend that you have the
latest Service Pack installed.
Note: The installation dialog will display in English if your operating
system’s language is not supported.
To install ATI drivers and software
1 Start your system. When the Found New Hardware Wizard
comes up, click Cancel. When the System Settings Change
window asks you to restart your computer, click No.
To Next Page
Loading...
