88 VPU Recover
Restore default settings
1 Move the mouse to the bottom right-hand corner of the window.
2 Click Defaults.
Note: Clicking Defaults will restore the defaults for the current view
only. Previous settings are not altered and will be saved once you
click OK.
Discard your settings
•Click Discard to ignore any unsaved changes and restore the
settings that existed when the Catalyst® Control Center was
opened or the last time Apply was used. Discard does not close the
Catalyst® Control Center.
Clicking
Discard applies to all features of an aspect, not just the feature in
the current view.
VPU Recover
VPU Recover enables the ATI display driver to detect when the graphics
processor stops responding to display-driver instructions. When this
happens, the display driver attempts to reset the graphics hardware. In most
cases, VPU Recover will be able to reset the graphics processor without
requiring a system restart.
Should the computer be unable to recover from a crash, VPU Recover will
switch the computer to software rendering mode, allowing you to save any
work in progress before restarting the computer.
To Next Page
Loading...
