Atlas Copco FlexiROC T30 R - Touch Buttons and Their Functions

FlexiROC T30 R 7 Feed Unit
36 No: 3629357835.1.3629419915 en-US
7.12 Check Condition of Feed
n
Check attachment and function on the limit switches (A).
n
Adjust rope tension on the pull and return rope (B).
n
Lubricate the intermediate drill rod support (C).
n
Check for wear on the drill rod support bearing (C). Replace if necessary.
n
Lubricate the water hose drum (D).
n
Check for wear on the water hose drum bearings (D).
n
Check wear and lubrication on the pull and return rope (E).
n
Check wear, tension, and lubrication on the hydraulic hoses (F).
n
Check for wear on the drill rod support halves (G).
n
Check attachment, play, wear, and damages on the rock drill cradle (G).
n
Check for leaks on the feed cylinder (I).
n
Check attachment and tightness of bolted joints on the rock drill (J).
n
Check for damage and wear on the feed beam (K).