Instruction book 
 
 
6996 0224 30  69 
 
9.  Declaration of conformity  
 
EU DECLARATION OF CONFORMITY 
 
We, Atlas Copco Airpower n.v., declare under our sole responsibility, that the product 
Machine type GVS 16A, GVS 25A, GVS 40A, GVS 60A, GVS 100A, GVS 200A, GVS 300A, GVS 470A, 
GVS 630A 
Serial number This declaration covers all product serial numbers from the date this Declaration was signed 
onwards. 
Which falls under the provisions of article 12.2 of the EC Directive 2006/42/EC on the approximation of the 
laws of the Member States relating to machinery, is in conformity with the relevant Essential Health and 
Safety Requirements of this directive. 
 
The machinery complies also with the requirements of the following directives and their amendments as 
indicated. 
 
Directive on the approximation of laws of the 
Member States relating to 
Harmonized and/or Technical 
Standards used 
Electromagnetic compatibility  
EN 61000-6-2 : 
EN 61000-6-4 : 
The harmonized and the technical standards used are identified in the attachments hereafter 
Atlas Copco Airpower n.v. is authorized to compile the technical file. 
 
Conformity of the product to 
the specification and by 
implication to the directives