Atlas Copco LSF28 S250-2 - Page 23

Exploded views/tables
Spare parts
Parts without ordering number are not delivered separately for technical reasons.
The use of other than genuine Atlas Copco replacement parts may result in decreased tool performance and
increased maintenance and may, at the company option, invalidate all warranties.
Motor
1
2
3
4
5
6
7 8 910 11 12 13
14 15
16
17
18 19 20 21 22 23 24
2011132
= Included in
Service Kit
LOCTITE 222
LOCTITE 641
LOCTITE 641
See Accessories
OFF
1.5 Nm
1.1 ftlb
0462 2000 14
5/8"
OFF
15 Nm
11 ftlb
4080 0848 80
OFF
60 Nm
44 ftlb
OFF
1 Nm
0.7 ftlb
0902 0419 00
3/4"
OFF
15 Nm
11 ftlb
9
0
Remark / Included in Service kitDescriptionQtyOrdering No.Ref. No.
Front nut14150 1611 021
Damping kit14150 1241 902(3-4)
Service kit 4081 0315 90Cover, compl.1-3
29.2x3 / Service kit 4081 0315 90O-ring1-4
Collet holder14150 1707 005
6200-2Z / Service kit 4081 0315 90Ball bearing1-6
29.1x1.6 / Service kit 4081 0315 90O-ring1-7
End plate14150 1203 008
FRP 2x5 / Service kit 4081 0315 90Pin2-9
Spacer14150 1202 0010
L =48Rotor14150 1201 0011
L=48 / Service kit 4081 0315 90Vane3-12
L=51Cylinder14150 1207 0113
End plate14150 1208 0014
696-2RS / Service kit 4081 0315 90Ball bearing1-15
Warning! Critical part. Check that the correct governor marked 37/25k is assembled.Governor14150 1237 8916
Casing, kit14150 1239 9117(18-24)
26.1x1.2 / Service kit 4081 0315 90O-ring1-18
MFTS M3x6 8.8 / Service kit 4081 0315 90Screw4-19
Casing1-20
3.3x2.4 / Service kit 4081 0315 90O-ring2-21
12.1x1.6 / Service kit 4081 0315 90O-ring2-22
Ring14150 1240 0023
23
© Atlas Copco Industrial Technique AB - 9836 2488 00
Spare part listENLSF28 S250-2