10
PAGE
Repair Instructions Nr.183.09/00
PHE 50 S
Mounting
the crank
1 Insert the piston and the connecting rod
into the gear housing (3).
2 Insert the complete crank (2) into the gear
housing (3) from below and hang it in the
connecting rod.
3 Insert the locking ring (1) with aid of spe-
cially cut pliers between toothed wheel
and gear housing (3).
☞
The locking ring (1) must cover the bor-
ing (4) (dotted line) to avoid the escap-
ing of any grease.
Mounting
the bearings
1 Press in the bearings (2) and (3).
2 Insert the fan type lock washer (4) and the
O-ring (5) into the gear cover (1).
123
4
2
4
1
3
5
To Next Page
Loading...