- 45 -
One line voltage - frequency - active power
display
This view shows one line voltage, frequency and
active power of the generator.
Active - reactive - apparent power display
This view shows the active, reactive and apparent
power of the generator.
Generator current display
This view shows the generator current.
Phase voltages mains display
This view shows the phase voltages of the mains (is
only shown in AMF mode).
Line voltages mains display
This view shows the line voltages of the mains (is
only shown in AMF mode).
Phase voltages generator display
This view shows the phase voltages of the generator.
4.3.4.4 Parameter list
The parameter menu's are pre-programmed!
A password will be asked for when an attempt to
change a setting is about to be done (user password =
2003).
By entering the parameter list, push button
AUTOMATIC is disposed of its normal operations
and will not perform any functionality.
It's possible to scroll between configuration menu's
by using the push buttons UP and DOWN.
Pushing the ENTER button activates the
configuration menu which is shown at the display.
G L1-L2
G f L1
P
400V
50Hz
80kW
M L1-N
M L2-N
M L3-N
230V
230V
230V
M L1-L2
M L2-L3
M L3-L1
400V
400V
400V
G L1-N
G L2-N
G L3-N
230V
230V
230V
To Next Page
Loading...
