Steps Of Installation 9
BP8000
C. Check The Parts Before Assembly
1. Packaged lift and hydraulic power unit.
Fig. 6
2. Move the lift aside with fork lift or hoist, and open the outer packing carefully,
take off the parts from upper and inside the column, take out the parts box,
check the parts according to the shipment parts list.
Fig. 7
3. Loosen the screws of the upper package stand, take off the upper column and
remove the package stand.
Parts box
Serial No.
Floor cover
Shipment Parts list
To Next Page
Loading...
Need help?
General
