Operation And Use 30
Kwik Bay
• Position the vehicle at the centre of the platform. Check to make sure that
the vehicle is secured.
• Place the pads in the positions;
• Set the power switch to 1 position;
• Press the lifting button to raise the vehicle;
• To rest the lift in standing position at the desired height by releasing the
lifting button;
8.3 To Lower The Lift
• Be sure the safety area is free of people and objects;
• Press the lowering button, the lift will be raised a little bit to assure the
release of the safeties;
• Keep pressing the lowering button to lower the lift completely.
8.4 To Move The Lift
When the lift needs to be moved, proceed as below:
• Place the lift at a proper height;
• Refer to the fi gure 15, slide 2 kit of lift wheels onto the support;
• Lower the lift completely by pressing the lifting button. In this case, the
rear side of the base will be raised a little bit;
• Attach the hook placed on the carriage to the hole placed on the front
beam as shown in the fi gure 16.
• Pull the carriage to move the lift.
Fig. 15 Fig. 16
To Next Page
Loading...
Need help?
General
