10.30 10.30 Electrical Electrical systemsystem
AATTLLEET T SSEERRVVIICCE E MMAANNUUAALL AAttlleett''s s ttrruucck k ccoommppuutteer r AATTCC
10.10.111.51.5 CaliCalibratbration aion and cond controntrol of the hl of the hydraydraululic levic leversers
Hydraulic levers are calibrated by measuring the Hydraulic levers are calibrated by measuring the maximum stroke and neutralmaximum stroke and neutral
position for this function. See chapter 8.position for this function. See chapter 8.
1010.1.11.61.6 RunRunninning tg time ime fufuncnctiotionsns
The running times of the following functions can be read:The running times of the following functions can be read:
•• TToottaal ul ussaaggee..
•• PuPump mp momototor or on 5 ln 5 levevelels.s.
•• FFoorrwwaarrddss..
•• BBaacckkwwaarrddss..
The running time of each function presented in hours. The maximum number ofThe running time of each function presented in hours. The maximum number of
hours is 99999. When printing the hours is 99999. When printing the running hours are also calculated and shown asrunning hours are also calculated and shown as
a percentage of the total usage. The running hours can either be reset for all units ora percentage of the total usage. The running hours can either be reset for all units or
individually.individually.
1010.1.11.71.7 PriPrintnting ing of of ststatiatiststicsics
A function is available under CUSTOMER Service to print all statistical functionsA function is available under CUSTOMER Service to print all statistical functions
either individually or all at once. Any serial printer either individually or all at once. Any serial printer or a PC can be used for or a PC can be used for thisthis
purpose.purpose.
1010.1.11.1.88 CoCollllisisioion sen sensnsoror
This function requires a special sensor mounted on This function requires a special sensor mounted on the chassis.the chassis.
The program has 5 adjustable limits and when one of these is exceeded one or moreThe program has 5 adjustable limits and when one of these is exceeded one or more
of the fof the following functions are activated:ollowing functions are activated:
1.1. A waA warnrnining mg mesessasage ige is ss shohown wn on on ththe de disisplplayay..
2.2. The tThe trucruck's nk's normormal hoal horn is arn is actictivavated ated and prnd produoduces aces an intn intermermittittent sent signignal.al.
3.3. ThThe wae warnrnining lag lamp mp on ton the he trutruck ck lilighghts/ts/flaflashsheses..
44.. TThhe e ttrruucck k llooggs s ooffff..
5.5. A spA spececiaial pal passsswoword ird is res reququireired to sd to stotop thp the abe abovove.e.
When one of the 5 levels is exceeded a warning text is shown on the display at theWhen one of the 5 levels is exceeded a warning text is shown on the display at the
same time as the impact force of the collision is stored with tsame time as the impact force of the collision is stored with the time, date and driverhe time, date and driver
ID in the customer log.ID in the customer log.
1010.1.11.1.99 AATC cTC coonnnnecectotorr
ATC, contactor and pin ATC, contactor and pin numbering. Fuses, see section 10.9 Fuses.numbering. Fuses, see section 10.9 Fuses.
To Next Page
Loading...