EElleeccttrriiccaal l ssyysstteemm 1100..3399
AAttlleett''s s ttrruucck k ccoommppuutteer r AATTCC AATTLLEET T SSEERRVVIICCE E MMAANNUUAALL
Factory set valuesFactory set values
* For URF the value is 0.* For URF the value is 0.
The parameters that the driver can adjust make up a percentage of the value in theThe parameters that the driver can adjust make up a percentage of the value in the
category he/she has been placed in. For category he/she has been placed in. For example, the top speed is set example, the top speed is set by:by:
Note!Note!
If the parameter "Max. speed reverse" If the parameter "Max. speed reverse" is set lower than 100% it will also beis set lower than 100% it will also be
added to the above calculation example when reversing.added to the above calculation example when reversing.
Note!Note!
When the parameter for soft hydraulics is 1, When the parameter for soft hydraulics is 1, the soft hydraulics are forced the soft hydraulics are forced in.in.
The driver cannot set the Soft Hydraulics The driver cannot set the Soft Hydraulics parameter to 0 and get hardparameter to 0 and get hard
hydraulics.hydraulics.
Individual driver settingsIndividual driver settings
Each driver ID code can have its own performance profile, but this must be linkedEach driver ID code can have its own performance profile, but this must be linked
to one of the four drto one of the four driver categories. When a new driver is defined a iver categories. When a new driver is defined a new question isnew question is
asked “Driver category”? - at the end of asked “Driver category”? - at the end of the sequence. On delivery the factory codethe sequence. On delivery the factory code
1/2222 is linked to “AC 1/2222 is linked to “AC Driver 1” category.Driver 1” category.
FunctionFunction
Performance categoryPerformance category
11 22 33 44
Drive speedDrive speed
110000 8800 5500 110000
Creep speedCreep speed
4400 4400 4400 5500
Current limit DrivingCurrent limit Driving
110000 9900 8800 110000
Acceleration driveAcceleration drive 8800 7700 6600 110000
Reduction brake, driveReduction brake, drive 9900 7755 7700 110000
Reverse brakeReverse brake 7755 7700 7700 110000
Pedal brakingPedal braking 110000 110000 9900 110000
Maximum backward speedMaximum backward speed 110000 8800 8800 110000
Maximum pump speedMaximum pump speed 110000 110000 9900 110000
Maximum lowering speedMaximum lowering speed 110000 110000 110000 110000
Acceleration pumpAcceleration pump 110000 110000 9900 110000
Soft hydraulicsSoft hydraulics 00 00 11** 00
Top speed = Machine parameter (see 2.1) × Driver category % (see 2.2) × Driver's ownTop speed = Machine parameter (see 2.1) × Driver category % (see 2.2) × Driver's own
settings %settings %
Example: Top speed = 12 km/h × 90% × 100% = 10.8 km/h.Example: Top speed = 12 km/h × 90% × 100% = 10.8 km/h.
To Next Page
Loading...