EElleeccttrriiccaal l ssyysstteemm 1100..9911
E102, E107 Subinfo: Controller saftety OutputE102, E107 Subinfo: Controller saftety Output..
E102, E107 Subinfo: Controller not E102, E107 Subinfo: Controller not responding.responding.
Has some other error code beenHas some other error code been
logged when the error arose?logged when the error arose?
YYeses
See the trouble shooting chart forSee the trouble shooting chart for
relevant error codes.relevant error codes.
NoNo
Is +48V DC present in the circuitIs +48V DC present in the circuit
B+ 4, X99.3 up to K7.85?B+ 4, X99.3 up to K7.85?
šš
NoNo
Change the cable.Change the cable.
YYeses
Is the circuit K9.86, X99.5 up toIs the circuit K9.86, X99.5 up to
E4.9 intact with low-resistance?E4.9 intact with low-resistance?
šš
NoNo
Change the cable.Change the cable.
YYeses
Is the circuit K7.86 - K9.85 intact?Is the circuit K7.86 - K9.85 intact?
šš
NoNo
Change the cable.Change the cable.
YYeses
Is the freewheel diode across theIs the freewheel diode across the
relay coils intact?relay coils intact?
šš
NoNo
Change the cable.Change the cable.
YYeses
Are the relay coils K7 and K9Are the relay coils K7 and K9
intact, and do they have aintact, and do they have a
reresisiststanance ce of of ararouound nd 303000 ??
šš
NoNo
Replace the relay.Replace the relay.
YYeses
RReeppllaacce e EEPPS S uunniitt.. TThhe e eerrrroor r ooccccuurrs s wwhheen n tthhe e ccuurrrreenntt
intensity in the safety input'sintensity in the safety input's
current circuit falls outside of thecurrent circuit falls outside of the
allowed range.allowed range.
Press OFF/On on the keyboard.Press OFF/On on the keyboard.
Does this solve the problem?Does this solve the problem?
YYeses
Finished.Finished.
ΩΩ
To Next Page
Loading...