Do you have a question about the Atmos MISSION ONE and is the answer not in the manual?
Water Resistance | 100m / 330ft |
---|---|
Wireless Connectivity | Bluetooth |
Battery Type | Rechargeable Lithium-ion |
Dive Modes | Gauge, Freedive |
Compass | Yes |
Battery Life | 30 hours |
Sensors | Depth, Temperature |
Operating Temperature | -10°C to 50°C |
General safety precautions and best practices for diving with the device.
Instructions for powering the device on and off.
Details on how to charge the device and charging time.
Steps to connect the device to the ATMOS App via Bluetooth.
How to enable and use SMS and call notifications from a smartphone.
Process for syncing dive logs from the device to the ATMOS App.
Guide on updating the device's firmware via USB or the ATMOS App.
Explanation of No Fly Time and Surface Interval indicators and their meaning.
How to activate, use, and exit the stopwatch function.
Information about the automatic water entry detection and its limitations.
How to view sunrise and sunset times on the device.
Details on the 'Predive' and 'During the dive' screen layouts and their elements.
How to mark and manage headings using the compass function.
Information about the Fast Ascent alarm and recommended ascent rates.
Notifications for reaching Dive Time and maximum depth limits.
Conditions and display for the Safety Stop.
How the countdown pauses during a safety stop and completion notification.
Notifications for remaining NDL time and mandatory decompression stops.
Alarm that appears when ascending above the deco stop ceiling depth.
Explanations of MOD, CNS, and Battery Low warning indicators.
How to set Air Mix (21-40%) in Scuba Mode's advanced settings.
Using the Dive Plan setting to view NDL for selected depths.
How to adjust conservatism settings in Scuba Mode.
Details on conservatism settings and Air/Nitrox configuration.
Recommended surface interval after scuba diving before freediving.
Explanation of 'Predive' and 'During the dive' screen layouts and their elements.
Explanation of the 'Surface Rest' screen layout and its elements.
Notifications for 'Rest Finished' based on dive depth and surface time.
Setting Time Alarms in Freedive mode.
Setting Depth Alarms in Freedive mode.
How to activate and use the stopwatch in Freedive mode.
Settings for water type and starting depth in Freedive mode.
Settings for dive delay, time alarm, and depth alarm.
Explanation of the 'Predive' screen layout and its elements in Gauge Mode.
Explanation of the 'During The Dive' screen layout and its elements.
How to enter and use the mark compass heading function.
Information on Time Alarm, Depth Alarm, and Battery Low alerts.
How to reset the bottom timer during a dive.
Accessing and adjusting advanced settings in Gauge mode.
Steps to locate an open area and acquire a GPS signal.
How the device saves dive entry and exit GPS coordinates.
Accessing the Dive Site function in different dive modes.
Instructions on how to calibrate the compass for accuracy.
Instructions for applying the screen guard to the device.
Information about strap compatibility and screw size.
Guidelines for cleaning, storing, and maintaining the device.
Details of the limited warranty for the product.
Conditions under which warranty claims are not valid and warranty limitations.
Technical specifications including model, measurements, weight, materials, and display.
Details on battery life in different modes and backlight settings.
Features related to timekeeping, alarms, and backlight activation.
List of sensors integrated into the device.
Connectivity, smart notifications, and smartphone compatibility.
Key diving capabilities, modes, and decompression settings.
Details on backlight functionality and E-Compass features.
GPS dive spot guide and custom activation depth settings.
Customization options for water type and alarm methods.
List of items included in the product package.
Compliance statement regarding FCC rules and potential interference.
Cautions on modifications and FCC radiation exposure limits.