EasyManua.ls Logo

ATOMI ALPHA - Page 16

ATOMI ALPHA
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8]TMGEPP]EXs+s(VERKIGERFILEPJXLEXSJXLIWEQIFEXXIV]EXs+s('EXXIV]VERKI[MPPVIGSZIV[LIR
temperature rises.
Completely draining the battery may cause permanent damage to the battery. Damage caused by over-charging or
under-charging will not be covered by the Limited Warranty.
Brake Adjustment
Locate the adjustment screw at the connection of the brake cable and handle. Turn the screw clockwise to tighten
it. If the screw has reach maximum position of adjustment, and the brake is not comfortably tight, proceed to the next
step.
Locate the screw on the brake lever on the left hand side of the wheel. Tighten the screw by turning it clockwise.
.J]SYǻRHXLIFVEOIMWXSSXMKLXVIZIVWIXLITVSGIWWERHWPMKLXP]YRXMKLXIRXLIFVEOI
You are advised to tighten the brake after 200 kilometers ride, or whenever you feel the brake is not performing well.
If you are not sure how to adjust the brake, please refer to the video via our support center at www.atomiscooters.com/support
Do not attempt to disassemble the battery. Do not touch battery contacts. Do not
dismantle or puncture the casing. Keep the battery contacts away from metal
SFNIGXWXSTVIZIRXWLSVXGMVGYMXVMWOSJǻVIERHIPIGXVMGWLSGO
WARNING!
13