30
Decompression:
At Stop
To reach your decompression stop, ascend at
a constant 30 foot per minute rate to the depth
indicated in the Deco Stop window. When you
are within 5 ft (1.5m) of the indicated depth,
the Deco Stop label will be replaced by the At
Stop label. The timer will count down to zero
as you complete the stop.
When completed, the next stop (if required) will
be indicated in the Deco Stop window.
If you go below the stop depth after beginning
a stop, the timer will stop counting and a GO
UP! alert will sound and display. Continuing to
descend will result in the calculation of a new
decompression schedule, which may include
deeper or longer stops.
Main Menu
Ready to Dive
When you reach a
depth within 5' (1.5m)
of the stop depth,
the label will change
from Deco Stop to At
Stop and the time will
begin counting down
towards zero.
To Next Page
Loading...