OVERLAY TAB –!ADD
MEDIA, LAYOUT, PIP
To add Overlay graphics to your program feed, navigate to the Overlay tab in the main menu.
Before you start, transfer some PNG graphics onto your SD Card.
Note: The maximum resolution for PNG files is 1920 x 1080 Pixels. Alpha transparency is
fully supported.
After you transferred your overlay graphics to the SD card, insert it into the SD card slot on
the right side of the ZATO CONNECT.
Add Media:
In the Overlay tab, start in the Add Media submenu, where you can load up to 8 PNG
graphics into the ZATO's media slots.
To add an overlay graphic to a media slot, you first need to select the slot you want to load
the graphic into.
To Next Page
Loading...
