16
Engraving
Material
Plastic
100 3000 800 Threshold NO
Leather
100 4000 1000 Threshold NO
Aclic
100 6000 1000 Threshold NO
Rubber
100 1000 1000 Threshold NO
Oil
painting paper
50 2000 1000 Threshold NO
Rock
20 1000 1000 Threshold NO
Quality
Speed
（mm / min）
Max-Power Image Mode
Needs to
be blackened
Remark：
1.The parameter table is only for the most widely used materials. Customers may need to t other uncommon
materials by themselves, or they can contact us to apply for testing.
2.Vector les line mode parameters：
Copper：Speed 500mm/m，acceleration 200,Natural color alumina：Speed 600mm/m，acceleration 200
Other materials：Speed 1000mm/m，acceleration 200
3.For engraving non-vector format les, please refer to the above parameter table.
To Next Page
Loading...