6. Test Instructions
Test mode Operation instructions
CC Mode Constant current test mode
Operation method:
When selecting the"CC" constant current discharge mode in
the menu, regardless of the input voltage No change, set the
cut-off voltage and discharge parameters of the battery,
press the "OK/Start" button, and will work at the set
current value for constant discharge!
CV Mode Constant Voltage test mode
Operation method:
When the menu is set to work in the constant voltage
discharge mode of "CV", the tested power supply needs to
be Constant current power supply, at which point
will operate at the set voltage value Constant voltage
discharge!
(Constant Voltage mode cannot test the battery)
CP Mode Constant Power test mode
When menu is set to work in "CP" constant power discharge
mode, regardless of whether the input voltage changes,
BW150 automatically calculates the current to voltage ratio
and works at set power value for constant power discharge!
Combined with a high-voltage trigger, the maximum power
of the charger can be tested.
(Constant power mode cannot test the battery)
CR Mode Constant resistance test mode
When the menu is set to work in "CR" constant resistance
discharge mode, regardless of the input voltage Whether
the current has changed or not, will automatically
calculate according to the set resistance value The ratio of
voltage to current equals a constant resistance value for
discharging!
To Next Page
Loading...