EasyManua.ls Logo

ATP Instrumentation 1309 - Spectral Sensitivity Characteristic

Default Icon
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. After turning off the meter, disconnect the battery cover
with a screwier.
3. Disconnect the battery from the instrument and replace
it with a standard 9V battery and go for the cover.
SPECTRAL SENSITIVITY CHARACTERISTIC
¾ To the detector, the applied photo diode with filters
makes the spectral sensitivity characteristic
almost meet C.I.E.(INTERNATIONAL
COMMISSION ON ILLUMINATION) Photo
curve V (λ) as the following chart described.
MAINTENANCE
1. The white plastic disc on the top of the detector should
be cleaned with a damp cloth when necessary.
2. Do not store the instrument where temperature or
humidity is excessively high.
3. The reference level, as marker on the face plate, is the
9