EasyManua.ls Logo

Atrie 336RE User Manual

Default Icon
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Atrie 33.6K
MODEM
User's Manual
Question and Answer IconNeed help?

Do you have a question about the Atrie 336RE and is the answer not in the manual?

Atrie 336RE Specifications

General IconGeneral
BrandAtrie
Model336RE
CategoryModem
LanguageEnglish

Summary

Introduction

Features

Details modem compatibility with standards and advanced functionalities.

Package Contents

Lists items included in the modem package for user verification.

Modem Panel Description

Describes the front and rear panels of the ATRIE 336RE modem.

LED Indicators

Explains the function of each LED on the modem's front panel for status monitoring.

Modem Front Panel

Diagram and labels for the front panel of the ATRIE 336RE modem.

Modem Rear Panel

Details the rear panel components like POWER, SERIAL PORT, and LINE connections.

Dip Switch Configuration

Explains the 12-position DIP switch settings for operation and line type selection.

DIP Switch Operation Modes

Configures asynchronous/synchronous operation, DTE speed, and line speed selection.

DIP Switch Power-On Options

Sets configuration loading from DIP switches or NVRAM and selects answer/dial-up modes.

AT Command Guidelines

AT Command Set Overview

Introduces basic AT commands for modem control and operation.

AT Command Details

Details AT commands for speaker volume, handshake modes, and result codes.

AT Command Serial Port Control

Commands for controlling serial port DCD/DTR signals and modem reset.

AT Command Configuration & Flow Control

Commands for restoring factory settings, guard tones, and flow control.

AT Command Line Type & Mode Selection

Commands for selecting line types, async/sync modes, and pulse dial ratios.

AT Command Communication & Signal Quality

Commands for communication modes, data compression, and signal quality reporting.

AT Command Operating Mode & Break Signal

Commands for setting operating modes, break signals, and viewing stored numbers.

AT Command Modulation & MNP10

Commands for selecting modulation, automode, and MNP10 power level adjustments.

AT Command Link Negotiation & Equalizer

Commands for link negotiation speed, fallback modes, and equalizer settings.

V.25bis Command Set

V.25bis Dialing and Number Management

Commands for dialing numbers and managing stored numbers in V.25bis mode.

V.25bis Call Handling

Controls auto-answer behavior and incoming call handling in V.25bis mode.

V.25bis Result Codes

Explains the result codes returned by the modem during V.25bis operation.

S Register Summary

S Register Definitions (S0-S12)

Details S registers S0 through S12, their functions, default values, and ranges.

S Register Definitions (S14-S26)

Details S registers S14 through S26, including bit-mapped and delay settings.

S Register Definitions (S27-S41)

Details S registers S27 through S41, covering timers, characters, and status options.

S Register Definitions (S46-S201)

Details S registers S46 through S201, covering data compression, negotiation, and attenuation levels.

Specifications

Compatibility and Speed Specifications

Lists supported communication standards and available data speeds.

Throughput, Command, and Protocol Specifications

Details maximum throughput, command compatibility, and supported protocols.

Hardware Features: DIP Switch, LED, Handshake

Describes DIP switch functions, LED indicators, and handshake modes.

Technical Features: Diagnostic, Flow Control, NVRAM

Covers diagnostic tests, flow control methods, and NVRAM storage capabilities.

Physical and Electrical Specifications

Details output levels, line types, physical dimensions, and weight.

Interface and RS-232C Pin Definition

Specifies interface connectors and defines the pinout for the RS-232C connector.

Result Codes

Result Codes (0-23)

Lists short and long form result codes for common modem states like OK, CONNECT, and NO CARRIER.

Result Codes (40-49)

Lists result codes related to carrier detection at various speeds.

Result Codes (50-81, +F4)

Details result codes for carrier detection, connection speeds, compression, and protocols.

Related product manuals