Need help?Do you have a question about the ATS BULLSEYE and is the answer not in the manual?
Explains the function of the On/Off switch, LEDs, and leak detection bar.
Details the meaning of the red and green lamps on the AC charger.
Details using 90g canisters, paintball canisters, and industrial CO2 bottles.
Guides on connecting regulators, pressurizing, and monitoring the AC system.
Covers using the IR sensor, foam application, and interpreting results.
Instructions for refilling the aerosol bottle with distilled water.
Explains using 90g canisters, paintball canisters, and industrial CO2 bottles.
Guides on connecting regulators, hoses, and pressurizing the EVAP system.
Details adjusting regulators, checking pressure, and identifying EVAP leaks.
Covers using the IR sensor, foam application, and interpreting results.
Instructions for refilling the aerosol bottle with distilled water.
Guides on connecting the unit, power leads, and checking indicators.
Details back probing vent and purge solenoids for testing.
Covers actuating vent/purge valves and pressurizing the fuel system.
Guides on safety, turning on the detector, and sensitivity settings.
Covers running the engine, turning it off, and accessing the cooling system.
Details positioning the sensor, alerts, and indicating gas presence.
Instructions for refilling the aerosol bottle with distilled water.
Explains using paintball canisters and industrial CO2 bottles for tires.
Guides on letting air out, connecting chuck, and filling tires with CO2.
Covers using the IR sensor, foam application, and interpreting results.
Instructions for refilling the aerosol bottle with distilled water.
Details using large CO2 supplies like paintball canisters or industrial bottles.
Guides on locating the compressor and connecting the Air Ride adapter.
Covers connecting regulators, closing compressor valve, and filling air bags.
Details using scantool, filling system, and testing for leakage.
Covers using the IR sensor, foam application, and interpreting results.
Instructions for refilling the aerosol bottle with distilled water.
Explains the function of the On/Off switch, LEDs, and leak detection bar.
Details the meaning of the red and green lamps on the AC charger.
Details using 90g canisters, paintball canisters, and industrial CO2 bottles.
Guides on connecting regulators, pressurizing, and monitoring the AC system.
Covers using the IR sensor, foam application, and interpreting results.
Instructions for refilling the aerosol bottle with distilled water.
Explains using 90g canisters, paintball canisters, and industrial CO2 bottles.
Guides on connecting regulators, hoses, and pressurizing the EVAP system.
Details adjusting regulators, checking pressure, and identifying EVAP leaks.
Covers using the IR sensor, foam application, and interpreting results.
Instructions for refilling the aerosol bottle with distilled water.
Guides on connecting the unit, power leads, and checking indicators.
Details back probing vent and purge solenoids for testing.
Covers actuating vent/purge valves and pressurizing the fuel system.
Guides on safety, turning on the detector, and sensitivity settings.
Covers running the engine, turning it off, and accessing the cooling system.
Details positioning the sensor, alerts, and indicating gas presence.
Instructions for refilling the aerosol bottle with distilled water.
Explains using paintball canisters and industrial CO2 bottles for tires.
Guides on letting air out, connecting chuck, and filling tires with CO2.
Covers using the IR sensor, foam application, and interpreting results.
Instructions for refilling the aerosol bottle with distilled water.
Details using large CO2 supplies like paintball canisters or industrial bottles.
Guides on locating the compressor and connecting the Air Ride adapter.
Covers connecting regulators, closing compressor valve, and filling air bags.
Details using scantool, filling system, and testing for leakage.
Covers using the IR sensor, foam application, and interpreting results.
Instructions for refilling the aerosol bottle with distilled water.
General| Brand | ATS |
|---|---|
| Model | BULLSEYE |
| Category | Security Sensors |
| Language | English |
To Next Page