Need help?Do you have a question about the Atten ADS1000 Series and is the answer not in the manual?
Lists the different models within the ADS1000 series, detailing their specifications.
Highlights the key features and capabilities of the ADS1000 series oscilloscopes.
Details essential safety measures to prevent fire hazards and personal injury during operation.
Explains safety terms like DANGER, WARNING, CAUTION and product symbols.
Details the various buttons, knobs, and indicators on the oscilloscope's front panel.
Explains the waveform display area and different trigger status indicators.
Guides users on how to perform a simple check to ensure the oscilloscope is working correctly.
Details safety guidelines for using oscilloscope probes to prevent electric shock.
Explains the process of compensating the oscilloscope probes for accurate measurements.
Details how to set the probe attenuation to match the oscilloscope's settings.
Explains the purpose and usage of various menu and control buttons on the oscilloscope.
Describes the different connectors available on the oscilloscope for input and output signals.
Details the automatic setup feature for optimizing waveform display.
Explains how to restore the oscilloscope to its factory default settings.
Describes the functionality and usage of the universal control knob.
Covers settings and operations related to the vertical display of waveforms.
Details the controls and functions related to the horizontal display of waveforms.
Explains how to configure and use the trigger system for stable waveform capture.
Covers modes and settings for acquiring and sampling signals.
Describes options for configuring the waveform display appearance.
Introduces measurement functions including scale, cursor, and auto measurement modes.
Covers saving and recalling waveforms, setups, and data to internal memory and USB.
Details system settings, language, and other utility functions.
Explains how to record input waveforms with specified intervals and maximum frame counts.
Explains how to access and use the built-in online help system.
Demonstrates basic procedures for displaying and measuring signal frequency and amplitude.
Explains how to use cursors for time and voltage measurements on waveforms.
Guides on setting up the oscilloscope to capture transient or single-event signals.
Provides techniques for examining signal characteristics and separating noise.
Explains how to use video triggering for stable display of video circuits.
Demonstrates using the X-Y display mode for analyzing phase differences and Lissajous patterns.
Shows how to use math functions to analyze differential signals.
Lists and explains various messages displayed by the oscilloscope during operation.
Provides solutions for common problems like dark screen, no signal, and unstable display.
Outlines the product warranty terms and conditions for ATTEN products.
Provides contact details for ATTEN sales and service offices.
Details input coupling, impedance, maximum voltage, and probe attenuator settings.
Covers vertical sensitivity and channel voltage offset range.
Details display mode, resolution, color, contrast, persistence, and language settings.
Specifies operating temperature, humidity, and altitude limits.
Lists input voltage, frequency scope, and power consumption.
Provides physical dimensions and weight of the oscilloscope.
Lists all standard accessories provided with the ADS1000 series oscilloscope.
Lists the default settings for Channel 1 and Channel 2 operations.
Details the default settings for MATH operations, including FFT.
Specifies the default settings for the horizontal display and trigger controls.
Lists the default settings for cursor measurements.
Details the default settings for automatic measurements.
Specifies the default acquisition modes and sampling settings.
Outlines the default settings for waveform display appearance.
Provides recommendations for storing and handling the oscilloscope to prevent damage.
Details safe methods for cleaning the oscilloscope's exterior and display.
To Next Page
General