Need help?Do you have a question about the Atten APS3005S-3D and is the answer not in the manual?
General| Model | APS3005S-3D |
|---|---|
| Output Voltage | 0-30V |
| Output Current | 0-5A |
| Power Rating | 150W |
| Number of Channels | 1 |
| Line Regulation | ≤ 0.01% + 3mV |
| Load Regulation | ≤ 0.01% + 5mV |
| Ripple & Noise | ≤ 1mVrms |
| Display | LED |
| Cooling | Fan |
| Protection | Overload, Overvoltage, Overtemperature |
| Operating Temperature | 0°C to 40°C |
| Voltage Regulation | ≤ 0.01% + 3mV |
| Type | Linear |
| Input Voltage | 220V ±10%, 50/60Hz |
| Storage Temperature | -10°C to 70°C |
| Relative Humidity | ≤80% RH |
Details operating and storage conditions, plus physical dimensions for the power supply.
Lists output voltage, current, load regulation, ripple, and noise for channels.
Details rated output, load regulation, ripple, and noise for Channel III.
Covers series and parallel mode load regulation and ripple.
Outlines high voltage and insulation resistance test requirements.
Covers AC input requirements, heat dissipation, and output overshoot.
Step-by-step guide to setting the current limit for the power supply.
Describes how the power supply operates in constant voltage or current modes.
Explains power on/off, setting voltage/current, and connection methods.
Describes how to use channels I and II independently.
Details how to connect and operate the unit in series mode.
Details how to connect and operate the unit in parallel mode.
Instructions on replacing the fuse with the correct value.
Guidelines for proper installation, ventilation, and general maintenance.
Emphasizes proper grounding, indoor use, and avoiding obstructions.
To Next Page