Audi 4.2-litre V8 FSI - System overview - Audi RS4 (Bosch MED 9.1)

38
Engine management
System overview - Audi RS4 (Bosch MED 9.1)
Sensors
Air mass meter G70
Intake air temperature sensor G42
Accelerator pedal position sender G79
Accelerator pedal position sender 2 G185
Engine speed sender G28
Fuel pressure sender G247
Hall sender G40
Hall sender 3 G300
Fuel pressure sender, low pressure G410
Brake servo pressure sensor G294
Throttle valve module J338
Throttle valve drive angle senders 1+2
(electric power control) G187, G188
Lambda probe G39
Lambda probe after catalytic
converter G130
Brake light switch F
Brake pedal switch F47
Hall sender 2 G163
Hall sender 4 G301
Knock sensors 1+2
G61, G66
Coolant temperature sender G62
Intake manifold flap potentiometer G336
Additional signals:
Cruise control system on/off
Terminal 50
Door contact wake-up from convenience
system central control unit J393
Lambda probe 2 G108
Lambda probe after catalytic converter 2 G131
Intake manifold flap potentiometer 2 G512
Knock sensors 3+4
G198, G199
Powertrain CAN data bus
Engine control unit J623
(master)
Engine control unit 2 J624
(slave)
Clutch pedal switch F36
Clutch pedal switch for engine start F194
Starter button E378
Engine speed sender G28
Additional signals:
Door contact wake-up from
convenience system control unit J393