Audi A3 1997 - Replacing Turn Signal Indicator Bulb

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
- -> Pull holder -arrow- out of housing.
- Pull side light bulb out of holder.
Installing
Install in reverse order, paying attention to the following:
- Insert new bulb in holder, taking care not to touch glass bulb with bare hands.
- Press holder into reflector until it is felt to engage.
- Close housing cover.
1.14 - Replacing turn signal indicator bulb
Removing
- -> Release catch -1- at turn signal indicator housing with cross-head screwdriver -2- by giving 1/4 turn to
left.
- Press down catch at rear of turn signal indicator housing slightly and at the same time slide turn signal
indicator housing to front -arrow- out of guide.
- -> Turn holder -arrow- anti-clockwise and pull out of housing.
- Screw bulb out of holder.
Audi A3 1997 ➤
Electrical system - Edition 10.2003
1.13 - Replacing side light bulb (gas-discharge headlight) 105