Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Installing
Install in reverse order, paying attention to the following:
- Insert new bulb in housing, taking care not to touch glass bulb with bare hands.
- Heed bulb installation position
- Secure bulb with spring clip.
- Re-attach connector and close housing cover.
- Adjust fog light => Page 133 .
4.4 - Adjusting fog lights
Specifications for fog light adjustment:
=> Maintenance
Sequence of operations
Audi A3:
- -> Turn adjusting screw -arrow- to set height. No provision is made for lateral adjustment.
Audi S3:
- -> Pull off trim in lower section of bumper -arrow-.
Audi A3 1997 ➤
Electrical system - Edition 10.2003
4.3 - Replacing fog light bulbs 133
To Next Page
Loading...
