Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1.11 - Removing and installing mirror adjustment switch - 5-door model
Removing
- -> Screw out bolt -arrow-.
- Release top part of recessed handle moulding -1- and detach.
- Unplug connectors.
- -> Use small screwdriver to carefully release fasteners -arrows- at retaining frame -1-.
- Pull mirror adjustment switch out of top part of recessed handle moulding.
- -> Separate mirror adjustment switch -1- from trim -2- (release fastener -A-).
Installing
Install in reverse order, paying attention to the following:
- Press mirror adjustment switch into mirror adjustment trim until fasteners engage.
Audi A3 1997 ➤
Electrical system - Edition 10.2003
166 96 - Lights, Lamps, Switches - interior
To Next Page
Loading...
