Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Installing
Install in reverse order, paying attention to the following:
- To facilitate positioning of alternator, drive back bushings for retaining bolts slightly.
- Make sure ribbed belt is properly positioned and correctly routed.
- -> Ribbed belt routing on vehicles with no air conditioner
- -> Ribbed belt routing on vehicles with air conditioner
Connect battery. Action to be taken => Page 7 .
Start engine and check belt running.
Tightening torques
Component Nm
Alternator to bracket 25
Terminal 30/B+ to alternator 16
Audi A3 1997 ➤
Electrical system - Edition 10.2003
38 27 - Starter, Current supply
To Next Page
Loading...
