Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Installing
Install in reverse order, paying attention to the following:
Note:
Carefully insert rubber seal -4- in hole in rear window.
- Tighten securing nuts -2- (8 Nm).
- Fluid hose must be heard to engage in spray jet connection.
Audi A3 1997 ➤
Electrical system - Edition 10.2003
3.3 - Removing and installing rear wiper motor 83
To Next Page
Loading...
