Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Note:
Values of greater than 4.00 ms with reverse gear engaged are an indication of a defective ultrasonic sensor or
an open circuit in the wiring.
8.10 - Adaption
The adaption function can be used to make and save the following changes:
◆ Volume of warning tone
◆ Pitch (audio frequency) of warning tone
Adaption channel 01 - Volume of warning tone
- Start parking aid self-diagnosis => Page 209 .
-> Display on VAS 5051:
- From list -1- select diagnosis function "10 - Adaption".
-> Display on VAS 5051:
1 - Enter channel number
- Use keypad -2- to enter "01" for "Adaption channel 01" and confirm by touching Q key.
Audi A3 1997 ➤
Electrical system Self-diagnosis - Edition 02.2002
220 01 - Self-diagnosis
To Next Page
Loading...
