Audi A3 2024 - Page 279

8Y0012721BE
Emergency assistance
Rear towing loop
Fig. 162 Rear bumper: installing the towing loop (version
D)
Fig. 163 Rear bumper: installing the towing loop (version
2
The threaded opening for the towing loop is lo-
cated on the right rear of the bumper.
» Remove the towing loop from the vehicle tool
kit 2 page 266.
» Press the cap inward with brief, strong pressure
© fig. 162 or > fig. 163. The cap will loosen
from the bumper.
» Tighten the towing eye as far as it will go into
the mount. Use a suitable object to tighten the
towing eye completely and securely in the
mount.
» After using, place the towing loop back in the
vehicle tool kit.
If the towing loop is not tightened all the way
when installing, the threads may be pulled
out when towing the vehicle and result in an
accident.
Depending on the model, the shape of the cap
can
vary.
277
OwnersManuals2.com