Audi A4 2015 - Oil Seals; Overview of Fitting Locations - Oil Seals

2 Oil seals
⇒ “2.1 Overview of fitting locations - oil seals”, page 106
All work involving oil seals is described in ⇒ Servicing 7-speed
dual clutch gearbox 0CJ, 0CK, 0CL, 0DN, 0DP; Rep. gr. 39 ; Oil
seals .
2.1 Overview of fitting locations - oil seals
1 - Input shaft oil seal
❑ Renewing ⇒ Servicing
7-speed dual clutch
gearbox 0CJ, 0CK, 0CL,
0DN, 0DP; Rep. gr. 39 ;
Oil seals; Renewing in‐
put shaft oil seal
2 - Gearbox
3 - Flange shaft oil seal (left-
side)
❑ Renewing ⇒ Servicing
7-speed dual clutch
gearbox 0CJ, 0CK, 0CL,
0DN, 0DP; Rep. gr. 39 ;
Oil seals; Renewing oil
seal (left-side)
4 - O-ring
❑ Renew after removing
5 - Flange shaft oil seal (right-
side)
❑ Renewing ⇒ Servicing
7-speed dual clutch
gearbox 0CJ, 0CK, 0CL,
0DN, 0DP; Rep. gr. 39 ;
Oil seals; Renewing oil
seal (right-side)
6 - Cover for final drive
❑ Removing and installing
⇒ Servicing 7-speed
dual clutch gearbox
0CJ, 0CK, 0CL, 0DN,
0DP; Rep. gr. 39 ; Oil
seals; Renewing oil seal
(left-side)
7 - Oil seal for rear splined
shaft
❑ Four-wheel drive vehicles only
❑ Renewing ⇒ Servicing 7-speed dual clutch gearbox 0CJ, 0CK, 0CL, 0DN, 0DP; Rep. gr. 39 ; Oil seals;
Renewing oil seal for rear splined shaft
8 - Seal for parking lock shaft
❑ Renewing ⇒ page 37
Audi A4 2015 ➤ , Audi A4 Avant 2015 ➤ , Audi A4 China 2016 ➤ , Audi A4 a ...
7-speed dual clutch gearbox 0CJ, 0CK, 0CL, 0DN, 0DP - Edition 08.2018
106 Rep. gr.39 - Final drive - differential