Audi A4 2015 - Checking Selector Mechanism

1.2.2 Exploded view - manual release mechanism for parking lock, Q5
1 - Manual release cable (rear)
❑ For parking lock
❑ Do not bend or kink
❑ Removing and installing
⇒ page 32
2 - Nut
❑ 2x
❑ 4 Nm
3 - Frame (bottom section)
4 - Frame (top section)
5 - Cover
6 - Bolt
❑ 9 Nm
7 - Manual release cable (front)
❑ For parking lock
❑ Do not bend or kink
❑ Removing and installing
⇒ page 30
8 - Nut
❑ 8 Nm
9 - Bracket
❑ For manual release
mechanism
10 - O-ring
❑ Renew after removing
1.3 Checking selector mechanism
WARNING
Accidents and injury can be caused if a gear is inadvertently
engaged while the engine is running.
♦ Prior to performing work with engine running, put gearbox
in position “P” and pull up parking brake button to apply
the electromechanical parking brake.
♦ Observe safety precautions when the vehicle is moving
⇒ page 5 .
♦ You must work through all the tests listed.
♦ If the specified results are not obtained, check whether the
selector lever is installed correctly ⇒ page 25 and per‐
form “diagnosis” ⇒ Vehicle diagnostic tester.
Audi A4 2015 ➤ , Audi A4 Avant 2015 ➤ , Audi A4 China 2016 ➤ , Audi A4 a ...
7-speed dual clutch gearbox 0CJ, 0CK, 0CL, 0DN, 0DP - Edition 08.2018
1. Selector mechanism 17