– Remove bolt -2-.
– Unplug electrical connector -3-.
– Remove bolts -arrows- and detach cover -1- for parking lock.
– Remove bolts -arrows-.
– When doing so, use a roll-pin drift to turn parking lock shaft
approx. 3° against spring pressure -arrow-.
– Detach parking lock solenoid - N486- .
– Remove bolt -arrow- and detach gear sensor - G676- .
Installing
Installation is carried out in reverse order; note the following:
– Slide gear sensor - G676- onto parking lock shaft (pay atten‐
tion to different notches -arrows-), and screw in bolt -1- hand-
tight to secure.
Audi A4 2015 ➤ , Audi A4 Avant 2015 ➤ , Audi A4 China 2016 ➤ , Audi A4 a ...
7-speed dual clutch gearbox 0CJ, 0CK, 0CL, 0DN, 0DP - Edition 08.2018
1. Selector mechanism 35
To Next Page
Loading...
