Procedure
– Connect vehicle diagnostic tester .
– Select Diagnosis mode and begin diagnosis.
– Select Test plan tab.
– Choose Select own test and select following options one
after the other:
♦ Drive system
♦ 7-speed dual clutch gearbox 0CJ, 0CK, 0CL, 0DN, 0DP
♦ 01 - Self-diagnosis compatible systems
♦ 02 - Gearbox electronics
♦ 02 - Gearbox electronics, functions
♦ 02 - Replace control unit ⇒ Complete gearbox
– Start the selected program and follow the instructions on the
display of the vehicle diagnostic tester.
2.3 Tightening torques for gearbox
Note
♦
Tightening torques apply only to lightly greased, oiled,
phosphated or black-finished nuts and bolts.
♦
Additional lubricants such as engine or gear oil may be used,
but do not use lubricants containing graphite.
♦
Do not use degreased parts.
♦
Tolerance for tightening torques: ± 15%
♦ Flywheel to drive plate ⇒ Servicing 7-speed dual clutch gear‐
box 0CJ, 0CK, 0CL, 0DN, 0DP; Rep. gr. 30 ; Clutch; Exploded
view - flywheel and dual clutch
♦ Assembly mountings
⇒ “5.1 Exploded view - assembly mountings”, page 74
Audi A4 2015 ➤ , Audi A4 Avant 2015 ➤ , Audi A4 China 2016 ➤ , Audi A4 a ...
7-speed dual clutch gearbox 0CJ, 0CK, 0CL, 0DN, 0DP - Edition 08.2018
2. Removing and installing gearbox 69
To Next Page
Loading...
