Engine/gearbox attachment (6-cyl. TDI engine):
Item Bolt Nm
1
1)
M10x50
2)
65
2
1)
M12x100
4)
30 + 90°
3, 4, 5, 6
M12x100
4)
30 + 90°
7
M12x125
4)
30 + 90°
8, 9, 10
M10x60
4)
15 + 90°
A Dowel sleeves for centralising
•
1)
Also secures starter
•
2)
Property class 10.9; the steel bolt can be re-used any
number of times.
•
4)
Bolts must not be used more often than twice
⇒ page 71 .
Aluminium bolts must not be used more than twice. After first use,
bolts must therefore be identified with an “X” made by two chisel
marks -arrow-.
To avoid damaging the bolts when making this mark, do not clamp
them directly in a vice. Clamp a 14 mm socket with
1
/
2
" drive in
the vice instead, and insert the bolt into the socket, as shown in
illustration.
Bolts already marked with an “X” must not be used again.
Audi A4 2015 ➤ , Audi A4 Avant 2015 ➤ , Audi A4 China 2016 ➤ , Audi A4 a ...
7-speed dual clutch gearbox 0CJ, 0CK, 0CL, 0DN, 0DP - Edition 08.2018
2. Removing and installing gearbox 71
To Next Page
Loading...
